Input connection is via RCA (Phono) or stereo 3.5mm plug.
Kit Contents:
BS-200 Tactile Transducer
Post/Tube Mounting Bracket for BS-200
A-2.1 Amplifier
3 Metre Speaker Cable
Phono "Y" Splitter (Plug/2 x Sockets)
Phono "Y" Splitter (Socket/2 x Plugs)
2 Metre Phono Lead (Plug/Plug)
3.5mm Stereo "Y" Splitter
2 Metre 3.5mm Stereo Jack/2 x Phono Plug Lead
4 x G-44 Rubber Isolators
4 x Cable Ties
User Guide
Technical specification:
Reckhorn A-2.1 (3 channel) Amplifier.
AC Supply: 230/240V / 50 Hz. Protection circuits against overheat and shortcut with speaker relay.
Output power at distortion level:
SAT (Satellite): 0,7%, 4 ohms = 2 x 25W rms.
10 %, 4 ohms = 2 x 40W rms.
SUB (Subwoofer): 0,7 %, 4 ohms = 60W rms.
10 %, 4 ohms = 85W rms.
0,7 %, 2 ohms = 64W rms.
10 %, 2 ohms = 90W rms.
Frequency response SAT / SUB: 30-20.000 Hz / 20 - 500 Hz.
S-N Ratio: Over 95 dB.
RCA low input sensitivity: 0.3 volts / 10 k ohms.
SUB high cut (low pass): 50 - 300 Hz / 24 dB.
SUB subsonic 24dB: 10 - 150 Hz / 24 dB.
SAT satellite high pass variable: 30 - 400 Hz / 12 dB.
Maximum power consumption: 250W.
Fuse: T 6A / 250V.
Amplifier Dimensions (mm): 173(W) x 100(H) x *203(D) *Front controls add 15mm / Rear Speaker Terminal add 24mm.
Box Dimensions (cm): 29 x 24 x 18
Box Weight: 3.8kg
BS-200 Tactile Transducer.
Power Handling (RMS): 100 Watts
Impulse Power (2 seconds): 200 Watts
Impedance: 4 Ohm
Diameter: 158mm
Height: 45mm
Weight: 1.2 kg
Mounting Hole Diameter (3): 5mm
Mounting Bracket:
Diameter: 158mm.
Maximum post/tube diameter (with supplied Coach Bolts): 36mm (expandable with longer bolts).
Exposed length of post required (height of clamp): 40mm minimum.
Mounting plate protrudes 56mm above top of adjuster bracket - total clearance required from underside of seat to bottom of post fixing point is 96mm minimum.
Finish: Black semi-matt powder coat.
Your basket is empty.